Design and Fabrication of Flying Robot

Authors

  • Hariharan R. Assistant Professor, Department of Mechanical Engineering, BIST, BIHER, Bharath Institute of Higher Education & Research, Selaiyur, Chennai. Author
  • Golden Renjith Nimal R.J. Assistant Professor, Department of Mechanical Engineering, BIST, BIHER, Bharath Institute of Higher Education & Research, Selaiyur, Chennai. Author

DOI:

https://doi.org/10.61841/16bqh567

Keywords:

Flying Robot, Design and Fabrication, Highly Complex, Computer-Controlled Intelligent Systems.

Abstract

 As it is very much suitable to have a monitor view of a restricted area, this work has been taken up to fabricate such a flying robot. This is a high-tech remote flying robot specially designed for surveillance and monitoring application in military. The robot has battery powered propeller engine with two channel Radio Frequency (R.F) remote control. A high resolution colour camera with high frequency range transmitter is equipped for surveillance monitoring. A powerful transmitter and receiver enable to monitor surveillance up to distance of around hundred feet, Remote control is provided to control the robot. `The base transmitter transmits the signal, the signal is captured by the receiver in the robot and the received signal is fed to the Microcontroller Unit (MCU) where the signal is separated and is fed to independent motor drive circuit connected to high speed Direct Current (D.C) motor. A high frequency video camera is used to capture the live pictures which are transmitted to the base through a separate antenna fixed in the robot. The base unit has a receiver that gives video output which can be viewed in the monitor. This robot can be used where man cannot perform the task such as capture enemies landscape, gun fire operation and surveillance. A camera is used to monitor the surrounding. The robot configuration includes control transmitters for flying model robot, wireless camera and modulator receiver. 

Downloads

Download data is not yet available.

References

[1] Thooyamani, K.P., Khanaa, V., & Udayakumar, R. (2014). Virtual instrumentation based process of

agriculture by automation. Middle-East Journal of Scientific Research, 20(12): 2604-2612.

[2] Udayakumar, R., Kaliyamurthie, K.P., & Khanaa, T.K. (2014). Data mining a boon: Predictive system for

university topper women in academia. World Applied Sciences Journal, 29(14): 86-90.

[3] Anbuselvi, S., Rebecca, L.J., Kumar, M.S., & Senthilvelan, T. (2012). GC-MS study of phytochemicals in

black gram using two different organic manures. J Chem Pharm Res., 4, 1246-1250.

[4] Subramanian, A.P., Jaganathan, S.K., Manikandan, A., Pandiaraj, K.N., Gomathi, N., & Supriyanto, E.

(2016). Recent trends in nano-based drug delivery systems for efficient delivery of phytochemicals in

chemotherapy. RSC Advances, 6(54), 48294-48314.

[5] Thooyamani, K.P., Khanaa, V., & Udayakumar, R. (2014). Partial encryption and partial inference control

based disclosure in effective cost cloud. Middle-East Journal of Scientific Research, 20(12), 2456-2459.

[6] Lingeswaran, K., Prasad Karamcheti, S.S., Gopikrishnan, M., & Ramu, G. (2014). Preparation and

characterization of chemical bath deposited cds thin film for solar cell. Middle-East Journal of Scientific

Research, 20(7), 812-814.

[7] Maruthamani, D., Vadivel, S., Kumaravel, M., Saravanakumar, B., Paul, B., Dhar, S.S., Manikandan, A., &

Ramadoss, G. (2017). Fine cutting edge shaped Bi2O3rods/reduced graphene oxide (RGO) composite for

supercapacitor and visible-light photocatalytic applications. Journal of colloid and interface science, 498,

449-459.

[8] Gopalakrishnan, K., Sundeep Aanand, J., & Udayakumar, R. (2014). Electrical properties of doped

azopolyester. Middle-East Journal of Scientific Research, 20(11). 1402-1412.

[9] Subhashree, A.R., Parameaswari, P.J., Shanthi, B., Revathy, C., & Parijatham, B.O. (2012). The reference

intervals for the haematological parameters in healthy adult population of chennai, southern India. Journal

of Clinical and Diagnostic Research: JCDR, 6(10), 1675-1680.

[10] Niranjan, U., Subramanyam, R.B.V., & Khanaa, V. (2010, September). Developing a web recommendation

system based on closed sequential patterns. In International Conference on Advances in Information and

Communication Technologies, 101, 171-179. Springer, Berlin, Heidelberg.

[11] Slimani, Y., Baykal, A., & Manikandan, A. (2018). Effect of Cr3+ substitution on AC susceptibility of Ba

hexaferrite nanoparticles. Journal of Magnetism and Magnetic Materials, 458, 204-212.

[12] Premkumar, S., Ramu, G., Gunasekaran, S., & Baskar, D. (2014). Solar industrial process heating associated

with thermal energy storage for feed water heating. Middle East Journal of Scientific Research, 20(11),

1686-1688.

[13] Kumar, S.S., Karrunakaran, C.M., Rao, M.R.K., & Balasubramanian, M.P. (2011). Inhibitory effects of

Indigofera aspalathoides on 20-methylcholanthrene-induced chemical carcinogenesis in rats. Journal of

carcinogenesis, 10.

[14] Beula Devamalar, P.M., Thulasi Bai, V., & Srivatsa, S.K. (2009). Design and architecture of real time webcentric tele health diabetes diagnosis expert system. International Journal of Medical Engineering and

Informatics, 1(3), 307-317.

[15] Gupta, T., & Sharma, A. (2014). Search Accuracy in Web information Retrieval. International Journal of

Communication and Computer Technologies, 2(2), 98-105.

[16] Kakavand, Z.M., & Chalechale, A. (2015). Comparison of Two Different Distance Functions of Image

Retrieval for Detecting Species of Microscopic Fungi in Medical Mycology Laboratory. International

Academic Journal of Science and Engineering, 2(4), 39-44.

[17] Ramya, V., Ranjitha, S., Sathya Sofia, A., & Ganesh Kumar, P. (2014). Load Balancing of Tasks in Cloud

Computing Environment Using Honey Bee Behavior. International Journal of System Design and

Information Processing, 2(2), 25-53.

[18] Brindha, M.S. (2017). A Survey on Cross Layer Distributed Topology Control in Mobile Adhoc Network.

Bonfring International Journal of Networking Technologies and Applications, 4(1), 1-3.

[19] Kumar, P. (2014). Load Characteristics of Electric System for Distributing Power on Locality Based

Criterion. Bonfring International Journal of Power Systems and Integrated Circuits, 4(4), 39-43.

[20] Rama Rao, G., Purna Prakash, J., & Rama Raju, M. (2014). Designing High to Low Cost Solution for Crash

Recovery of Servers through Virtualization using Cloud Computing. International Scientific Journal on

Science Engineering & Technology, 17(5), 549-555.

[21] Arul Jothy, K., Sivakumar, K., & Delsey, M.J. (2018). Distributed System Framework for Mobile Cloud

Computing. Bonfring International Journal of Research in Communication Engineering, 8(1), 5-9.

[22] Kabeer, V., & Zainul Abid, T.P. (2013). Automated Face Recognition using Artificial Light Receptor Model

and SVM Classifier. The SIJ Transactions on Computer Science Engineering & its Applications, 1(3), 36-

41.

[23] Yasvanthkumaar, V., Sabitha, S., & NithyaKalyani, S. (2018). Parallel and Multiple E-Data Distributed

Process with Progressive Duplicate Detection Model. Bonfring International Journal of Software

Engineering and Soft Computing, 8(1), 23-25.

[24] Kanaga Sundar, R., Joe Paul, J., Krishna Kumar, M., & Laser, L. (2014).Secured POR for Flooding Attack

Prevention in Extremely Dynamic Ad Hoc Networks. The SIJ Transactions on Computer Networks &

Communication Engineering (CNCE), 2(2), 5-9.

[25] Ravichandran, A.T., Srinivas, J., Karthick, R., Manikandan, A., & Baykal, A. (2018). Facile combustion

synthesis, structural, morphological, optical and antibacterial studies of Bi1− xAlxFeO3 (0.0≤ x≤ 0.15)

nanoparticles. Ceramics International, 44(11), 13247-13252.

[26] Thovhogi, N., Park, E., Manikandan, E., Maaza, M., & Gurib-Fakim, A. (2016). Physical properties of CdO

nanoparticles synthesized by green chemistry via Hibiscus Sabdariffa flower extract. Journal of Alloys and

Compounds, 655, 314-320.

[27] Thooyamani, K.P., Khanaa, V., & Udayakumar, R. (2014). Wide area wireless networks-IETF. Middle-East

Journal of Scientific Research, 20(12), 2042-2046.

[28] Sundar Raj, M., Saravanan, T., & Srinivasan, V. (2014). Design of silicon-carbide based cascaded

multilevel inverter. Middle-East Journal of Scientific Research, 20(12), 1785- 1791.

[29] Achudhan, M., Jayakumar M.P. (2014). Mathematical modeling and control of an electrically-heated

catalyst. International Journal of Applied Engineering Research, 9(23), 23013.

[30] Thooyamani, K.P., Khanaa, V., & Udayakumar, R. (2013). Application of pattern recognition for farsi

license plate recognition. Middle-East Journal of Scientific Research, 18(12), 1768-1774.

[31] Jebaraj, S., Iniyan S. (2006). Renewable energy programmes in India. International Journal of Global

Energy Issues, 26(43528), 232-257.

[32] Sharmila, S., & Jeyanthi Rebecca, L. (2013). Md Saduzzaman., Biodegradation of domestic effluent using

different solvent extracts of Murraya koenigii. J Chem and Pharm Res, 5(2), 279-282.

[33] Asiri, S., Sertkol, M., Guner, S., Gungunes, H., Batoo, K.M., Saleh, T.A., Manikandan A., & Baykal, A.

(2018). Hydrothermal synthesis of CoyZnyMn1-2yFe2O4 nanoferrites: magneto-optical

investigation. Ceramics International, 44(5), 5751-5759.

[34] Rani, A.J., & Mythili, S.V. (2014). Study on total antioxidant status in relation to oxidative stress in type 2

diabetes mellitus. Journal of clinical and diagnostic research: JCDR, 8(3), 108-110.

[35] Karthik, B. (2014). Arulselvi, Noise removal using mixtures of projected gaussian scale mixtures. MiddleEast Journal of Scientific Research, 20(12), 2335-2340.

[36] Karthik, B., Arulselvi, & Selvaraj, A. (2014). Test data compression architecture for low power VLSI

testing. Middle - East Journal of Scientific Research, 20(12), 2331-2334.

[37] Vijayaragavan, S.P., Karthik, B., & Kiran Kumar, T.V.U. (2014). Privacy conscious screening framework

for frequently moving objects. Middle-East Journal of Scientific Research, 20(8), 1000-1005.

[38] Kaliyamurthie, K.P., Parameswari, D., & Udayakumar, R. (2013). QOS aware privacy preserving location

monitoring in wireless sensor network. Indian Journal of Science and Technology, 6(5), 4648-4652.

[39] Silambarasu, A., Manikandan, A., & Balakrishnan, K. (2017). Room-temperature superparamagnetism and

enhanced photocatalytic activity of magnetically reusable spinel ZnFe 2 O 4 nanocatalysts. Journal of

Superconductivity and Novel Magnetism, 30(9), 2631-2640.

[40] Jasmin, M., Vigneshwaran, T., & Beulah Hemalatha, S. (2015). Design of power aware on chip embedded

memory based FSM encoding in FPGA. International Journal of Applied Engineering Research, 10(2),

4487-4496.

[41] Philomina, S., & Karthik, B. (2014). Wi-Fi energy meter implementation using embedded linux in ARM

9. Middle-East Journal of Scientific Research, 20, 2434-2438.

[42] Vijayaragavan, S.P., Karthik, B., & Kiran Kumar, T.V.U. (2014). A DFIG based wind generation system

with unbalanced stator and grid condition. Middle-East Journal of Scientific Research, 20(8), 913-917.

[43] Rajakumari, S.B., & Nalini, C. (2014). An efficient data mining dataset preparation using aggregation in

relational database. Indian Journal of Science and Technology, 7, 44-46.

[44] Karthik, B., Kiran Kumar, T.V.U., Vijayaragavan, P., & Bharath Kumaran, E. (2013). Design of a digital

PLL using 0.35 μm CMOS technology. Middle-East Journal of Scientific Research, 18(12), 1803-1806.

[45] Sudhakara, P., Jagadeesh, D., Wang, Y., Prasad, C.V., Devi, A.K., Balakrishnan, G., Kim B.S., & Song, J.I.

(2013). Fabrication of Borassus fruit lignocellulose fiber/PP composites and comparison with jute, sisal and

coir fibers. Carbohydrate polymers, 98(1), 1002-1010.

[46] Kanniga, E., & Sundararajan, M. (2011). Modelling and characterization of DCO using pass transistors.

In Future Intelligent Information Systems, 86(1), 451-457. Springer, Berlin, Heidelberg.

[47] Sachithanandam, P., Meikandaan, T.P., & Srividya, T. Steel framed multi storey residential building

analysis and design. International Journal of Applied Engineering Research, 9(22), 5527-5529.

[48] Kaliyamurthie, K.P., Udayakumar, R., Parameswari, D., & Mugunthan, S.N. (2013). Highly secured online

voting system over network. Indian Journal of Science and Technology, 6(S6), 4831-4836.

[49] Sathyaseelan, B., Manikandan, E., Lakshmanan, V., Baskaran, I., Sivakumar, K., Ladchumananandasivam,

R., Kennedy, J., & Maaza, M. (2016). Structural, optical and morphological properties of post-growth

calcined TiO2 nanopowder for opto-electronic device application: Ex-situ studies. Journal of Alloys and

Compounds, 671, 486-492.

[50] Saravanan, T., Sundar Raj M., & Gopalakrishnan K. (2014). SMES technology, SMES and facts system,

applications, advantages and technical limitations. Middle - East Journal of Scientific Research, 20(11),

1353-1358.

Downloads

Published

31.08.2019

How to Cite

Design and Fabrication of Flying Robot. (2019). International Journal of Psychosocial Rehabilitation, 23(3), 50-57. https://doi.org/10.61841/16bqh567