Study of Chromium Nitrate Coating Prepared by RF/DC Magnetron Sputtering

Authors

  • Hariharan R. Research Scholar, Department of Mechanical Engineering, BIST, BIHER, Bharath Institute of Higher Education & Research, Selaiyur, Chennai Author
  • Raja R. Professor, Department of Mechanical Engineering, BIST, BIHER, Bharath Institute of Higher Education & Research, Selaiyur, Chennai. Author

DOI:

https://doi.org/10.61841/npc6zw33

Keywords:

CrN, XRD, RF/DC Magnetron Sputtering, HSS.

Abstract

 The reasonable solution to the requirement of semi-solid forming tools and low-melting-point metals and alloys while using chromium nitrate coating (crN). This type of hard coating has excellent mechanical behaviour when working at high temperatures. We will develop the related hard coating based on stainless steel. This method is obtained by RF/DC microwave sputtering on HSS substrate (high-speed steel). The multilayers are characterized in terms of their hardness, wear, and corrosion resistance. The sputtering state on the crystal structure of the films is examined by X-ray diffraction (XRD), AFM (atomic force microscope), SEM (scanning electron microscope), and hardness by micropenetration. The chromium-metal interlayer through the film structure enhances the coating of the steel by reducing current, mobility, and the better coefficient of thermal expansion. 

Downloads

Download data is not yet available.

References

[1] Thooyamani, K.P., Khanaa, V., & Udayakumar, R. (2014). Virtual instrumentation based process of

agriculture by automation. Middle-East Journal of Scientific Research, 20(12): 2604-2612.

[2] Udayakumar, R., Kaliyamurthie, K.P., & Khanaa, T.K. (2014). Data mining a boon: Predictive system for

university topper women in academia. World Applied Sciences Journal, 29(14): 86-90.

[3] Anbuselvi, S., Rebecca, L.J., Kumar, M.S., & Senthilvelan, T. (2012). GC-MS study of phytochemicals in

black gram using two different organic manures. J Chem Pharm Res., 4, 1246-1250.

[4] Subramanian, A.P., Jaganathan, S.K., Manikandan, A., Pandiaraj, K.N., Gomathi, N., & Supriyanto, E.

(2016). Recent trends in nano-based drug delivery systems for efficient delivery of phytochemicals in

chemotherapy. RSC Advances, 6(54), 48294-48314.

[5] Thooyamani, K.P., Khanaa, V., & Udayakumar, R. (2014). Partial encryption and partial inference control

based disclosure in effective cost cloud. Middle-East Journal of Scientific Research, 20(12), 2456-2459.

[6] Lingeswaran, K., Prasad Karamcheti, S.S., Gopikrishnan, M., & Ramu, G. (2014). Preparation and

characterization of chemical bath deposited cds thin film for solar cell. Middle-East Journal of Scientific

Research, 20(7), 812-814.

[7] Maruthamani, D., Vadivel, S., Kumaravel, M., Saravanakumar, B., Paul, B., Dhar, S.S., Manikandan, A., &

Ramadoss, G. (2017). Fine cutting edge shaped Bi2O3rods/reduced graphene oxide (RGO) composite for

supercapacitor and visible-light photocatalytic applications. Journal of colloid and interface science, 498,

449-459.

[8] Gopalakrishnan, K., Sundeep Aanand, J., & Udayakumar, R. (2014). Electrical properties of doped

azopolyester. Middle-East Journal of Scientific Research, 20(11). 1402-1412.

[9] Subhashree, A.R., Parameaswari, P.J., Shanthi, B., Revathy, C., & Parijatham, B.O. (2012). The reference

intervals for the haematological parameters in healthy adult population of chennai, southern India. Journal

of Clinical and Diagnostic Research: JCDR, 6(10), 1675-1680.

[10] Niranjan, U., Subramanyam, R.B.V., & Khanaa, V. (2010, September). Developing a web recommendation

system based on closed sequential patterns. In International Conference on Advances in Information and

Communication Technologies, 101, 171-179. Springer, Berlin, Heidelberg.

[11] Slimani, Y., Baykal, A., & Manikandan, A. (2018). Effect of Cr3+ substitution on AC susceptibility of Ba

hexaferrite nanoparticles. Journal of Magnetism and Magnetic Materials, 458, 204-212.

[12] Premkumar, S., Ramu, G., Gunasekaran, S., & Baskar, D. (2014). Solar industrial process heating associated

with thermal energy storage for feed water heating. Middle East Journal of Scientific Research, 20(11),

1686-1688.

[13] Kumar, S.S., Karrunakaran, C.M., Rao, M.R.K., & Balasubramanian, M.P. (2011). Inhibitory effects of

Indigofera aspalathoides on 20-methylcholanthrene-induced chemical carcinogenesis in rats. Journal of

carcinogenesis, 10.

[14] Beula Devamalar, P.M., Thulasi Bai, V., & Srivatsa, S.K. (2009). Design and architecture of real time webcentric tele health diabetes diagnosis expert system. International Journal of Medical Engineering and

Informatics, 1(3), 307-317.

[15] Ravichandran, A.T., Srinivas, J., Karthick, R., Manikandan, A., & Baykal, A. (2018). Facile combustion

synthesis, structural, morphological, optical and antibacterial studies of Bi1− xAlxFeO3 (0.0≤ x≤ 0.15)

nanoparticles. Ceramics International, 44(11), 13247-13252.

[16] Thovhogi, N., Park, E., Manikandan, E., Maaza, M., & Gurib-Fakim, A. (2016). Physical properties of CdO

nanoparticles synthesized by green chemistry via Hibiscus Sabdariffa flower extract. Journal of Alloys and

Compounds, 655, 314-320.

[17] Thooyamani, K.P., Khanaa, V., & Udayakumar, R. (2014). Wide area wireless networks-IETF. Middle-East

Journal of Scientific Research, 20(12), 2042-2046.

[18] Sundar Raj, M., Saravanan, T., & Srinivasan, V. (2014). Design of silicon-carbide based cascaded

multilevel inverter. Middle-East Journal of Scientific Research, 20(12), 1785- 1791.

[19] Achudhan, M., Jayakumar M.P. (2014). Mathematical modeling and control of an electrically-heated

catalyst. International Journal of Applied Engineering Research, 9(23), 23013.

[20] Thooyamani, K.P., Khanaa, V., & Udayakumar, R. (2013). Application of pattern recognition for farsi

license plate recognition. Middle-East Journal of Scientific Research, 18(12), 1768-1774.

[21] Jebaraj, S., Iniyan S. (2006). Renewable energy programmes in India. International Journal of Global

Energy Issues, 26(43528), 232-257.

[22] Sharmila, S., & Jeyanthi Rebecca, L. (2013). Md Saduzzaman., Biodegradation of domestic effluent using

different solvent extracts of Murraya koenigii. J Chem and Pharm Res, 5(2), 279-282.

[23] Asiri, S., Sertkol, M., Guner, S., Gungunes, H., Batoo, K.M., Saleh, T.A., Manikandan A., & Baykal, A.

(2018). Hydrothermal synthesis of CoyZnyMn1-2yFe2O4 nanoferrites: magneto-optical

investigation. Ceramics International, 44(5), 5751-5759.

[24] Rani, A.J., & Mythili, S.V. (2014). Study on total antioxidant status in relation to oxidative stress in type 2

diabetes mellitus. Journal of clinical and diagnostic research: JCDR, 8(3), 108-110.

[25] Karthik, B. (2014). Arulselvi, Noise removal using mixtures of projected gaussian scale mixtures. MiddleEast Journal of Scientific Research, 20(12), 2335-2340.

[26] Karthik, B., Arulselvi, & Selvaraj, A. (2014). Test data compression architecture for low power VLSI

testing. Middle - East Journal of Scientific Research, 20(12), 2331-2334.

[27] Vijayaragavan, S.P., Karthik, B., & Kiran Kumar, T.V.U. (2014). Privacy conscious screening framework

for frequently moving objects. Middle-East Journal of Scientific Research, 20(8), 1000-1005.

[28] Kaliyamurthie, K.P., Parameswari, D., & Udayakumar, R. (2013). QOS aware privacy preserving location

monitoring in wireless sensor network. Indian Journal of Science and Technology, 6(5), 4648-4652.

[29] Silambarasu, A., Manikandan, A., & Balakrishnan, K. (2017). Room-temperature superparamagnetism and

enhanced photocatalytic activity of magnetically reusable spinel ZnFe 2 O 4 nanocatalysts. Journal of

Superconductivity and Novel Magnetism, 30(9), 2631-2640.

[30] Jasmin, M., Vigneshwaran, T., & Beulah Hemalatha, S. (2015). Design of power aware on chip embedded

memory based FSM encoding in FPGA. International Journal of Applied Engineering Research, 10(2),

4487-4496.

[31] Philomina, S., & Karthik, B. (2014). Wi-Fi energy meter implementation using embedded linux in ARM

9. Middle-East Journal of Scientific Research, 20, 2434-2438.

[32] Vijayaragavan, S.P., Karthik, B., & Kiran Kumar, T.V.U. (2014). A DFIG based wind generation system

with unbalanced stator and grid condition. Middle-East Journal of Scientific Research, 20(8), 913-917.

[33] Rajakumari, S.B., & Nalini, C. (2014). An efficient data mining dataset preparation using aggregation in

relational database. Indian Journal of Science and Technology, 7, 44-46.

[34] Karthik, B., Kiran Kumar, T.V.U., Vijayaragavan, P., & Bharath Kumaran, E. (2013). Design of a digital

PLL using 0.35 μm CMOS technology. Middle-East Journal of Scientific Research, 18(12), 1803-1806.

[35] Sudhakara, P., Jagadeesh, D., Wang, Y., Prasad, C.V., Devi, A.K., Balakrishnan, G., Kim B.S., & Song, J.I.

(2013). Fabrication of Borassus fruit lignocellulose fiber/PP composites and comparison with jute, sisal and

coir fibers. Carbohydrate polymers, 98(1), 1002-1010.

[36] Kanniga, E., & Sundararajan, M. (2011). Modelling and characterization of DCO using pass transistors.

In Future Intelligent Information Systems, 86(1), 451-457. Springer, Berlin, Heidelberg.

[37] Sachithanandam, P., Meikandaan, T.P., & Srividya, T. Steel framed multi storey residential building

analysis and design. International Journal of Applied Engineering Research, 9(22), 5527-5529.

[38] Kaliyamurthie, K.P., Udayakumar, R., Parameswari, D., & Mugunthan, S.N. (2013). Highly secured online

voting system over network. Indian Journal of Science and Technology, 6(S6), 4831-4836.

[39] Sathyaseelan, B., Manikandan, E., Lakshmanan, V., Baskaran, I., Sivakumar, K., Ladchumananandasivam,

R., Kennedy, J., & Maaza, M. (2016). Structural, optical and morphological properties of post-growth

calcined TiO2 nanopowder for opto-electronic device application: Ex-situ studies. Journal of Alloys and

Compounds, 671, 486-492.

[40] Saravanan, T., Sundar Raj M., & Gopalakrishnan K. (2014). SMES technology, SMES and facts system,

applications, advantages and technical limitations. Middle - East Journal of Scientific Research, 20(11),

1353-1358.

[41] Elijah, Aiden, (2018). Co-Clustering based Cross-Domain Text Classification Algorithm with Semantic

ANALYSIS for Wikipedia.Journal of Computational Information Systems, 14(3), 44 - 49.

[42] Asim, M., Gopalia, R., & Swar, S.(2014). Comparison of Methods for Solving Travelling Salesmen

Problem.International Journal of Advances in Engineering and Emerging Technology, 5(2), 80-87.

[43] Kowsalya, P., & Rajhitha, G. (2015). Design and Implementation of AMI System for High Traffic Smart

Grid Applications using ZigBee. Excel International Journal of Technology, Engineering and Management,

2(1), 14-18.

[44] Skaria, B., Dr. John, E.T., & Shajan, P.X. (2016). Literature Review on Web Mining. Bonfring International

Journal of Data Mining, 6(1), 04-06.

[45] Moravej, Z., Behravesh, V., & Bagheri, S. (2015). Optimal PMU Placement for Power System Using Binary

Cuckoo Search Algorithm. International Academic Journal of Innovative Research, 2(10), 8-19.

[46] Retheesh, D. (2014). Analysis on FPGA Designs of Parallel High Performance Multipliers. International

Journal of Communication and Computer Technologies, 2(1), 11-18.

[47] Khan, A., & Dr. Khushnood, S. (2017). Simple and Efficient Blood Glucose Measurement Technique Using

Non Invasive Artificial Intelligence. Bonfring International Journal of Industrial Engineering and

Management Science, 7(1), 09-13.

[48] Omidvar, R. (2015). OOSP (Off-On Sources Problem). International Academic Journal of Science and

Engineering, 2(5), 22-31.

[49] Rajalakshmi, J., (2014). Implantable CPW Fed X-Shaped Monopole Antenna for Biomedical Application.

International Journal of System Design and Information Processing, 2(1), 23-26.

[50] Kaveen, P., & Dr.Singaravel, G. (2018). Simulation of Efficient Life-Time in Clustering Approaches for

New Approach in Wireless Sensor Network. Bonfring International Journal of Networking Technologies

and Applications, 5(1), 1-2.

Downloads

Published

31.08.2019

How to Cite

Study of Chromium Nitrate Coating Prepared by RF/DC Magnetron Sputtering. (2019). International Journal of Psychosocial Rehabilitation, 23(3), 85-104. https://doi.org/10.61841/npc6zw33