Design Estimation of the Amount of Solar Radiation Entering Automobile Glazing
DOI:
https://doi.org/10.61841/tdzt4h54Keywords:
Automobile, Calculation, Clear-sky, Fenestration, Glazing, Heat Load Estimation, Solar Angle, Solar Radiation, Windshield GlassAbstract
The amount of solar radiation entering a closed volume, say a building or an automobile is one of the major challenges to achieve creature comfort inside that closed volume. Automatic air conditioning systems are more common nowadays where sensors are being used to determine the incident solar radiation inside the comfort zone. An attempt is made in this research to replace such costly sensors and complex control logic with a simple algorithm to estimate the amount of solar radiation based on time and geographical data. This calculation of clearsky solar radiation on any receiving surface on earth whether an automobile surface under motion or a static fenestration of a building is derived based on historical data of select geographical locations in the world
Downloads
References
[1] Thooyamani, K.P., Khanaa, V., & Udayakumar, R. (2014). Virtual instrumentation-based process of agriculture
by automation. Middle-East Journal of Scientific Research, 20(12): 2604-2612.
[2] Udayakumar, R., Kaliyamurthie, K.P., & Khanaa, T.K. (2014). Data mining a boon: Predictive system for
university topper women in academia. World Applied Sciences Journal, 29(14): 86-90.
[3] Anbuselvi, S., Rebecca, L.J., Kumar, M.S., & Senthilvelan, T. (2012). GC-MS study of phytochemicals in
black gram using two different organic manures. J Chem Pharm Res., 4, 1246-1250.
[4] Subramanian, A.P., Jaganathan, S.K., Manikandan, A., Pandiaraj, K.N., Gomathi, N., & Supriyanto, E. (2016).
Recent trends in nano-based drug delivery systems for efficient delivery of phytochemicals in
chemotherapy. RSC Advances, 6(54), 48294-48314.
[5] Thooyamani, K.P., Khanaa, V., & Udayakumar, R. (2014). Partial encryption and partial inference control
based disclosure in an effective cost cloud. Middle-East Journal of Scientific Research, 20(12), 2456-2459.
[6] Lingeswaran, K., Prasad Karamcheti, S.S., Gopikrishnan, M., & Ramu, G. (2014). Preparation and
characterization of chemical bath-deposited CDS thin film for solar cells. Middle-East Journal of Scientific
Research, 20(7), 812-814.
[7] Maruthamani, D., Vadivel, S., Kumaravel, M., Saravanakumar, B., Paul, B., Dhar, S.S., Manikandan, A., &
Ramadoss, G. (2017). Fine-cutting edge-shaped Bi2O3rods/reduced graphene oxide (RGO) composite for
supercapacitor and visible-light photocatalytic applications. Journal of colloid and interface science, 498,
449-459.
[8] Gopalakrishnan, K., Sundeep Aanand, J., & Udayakumar, R. (2014). Electrical properties of doped
azopolyester. Middle-East Journal of Scientific Research, 20(11). 1402-1412.
[9] Subhashree, A.R., Parameaswari, P.J., Shanthi, B., Revathy, C., & Parijatham, B.O. (2012). The reference
intervals for the hemological parameters in the healthy adult population of Chennai, southern India. Journal
of Clinical and Diagnostic Research: JCDR, 6(10), 1675-1680.
[10] Niranjan, U., Subramanyam, R.B.V., & Khanaa, V. (2010, September). Developing a web recommendation
system based on closed sequential patterns. In International Conference on Advances in Information and
Communication Technologies, 101, 171-179. Springer, Berlin, Heidelberg.
[11] Slimani, Y., Baykal, A., & Manikandan, A. (2018). Effect of Cr3+ substitution on AC susceptibility of Ba
hexaferrite nanoparticles. Journal of Magnetism and Magnetic Materials, 458, 204-212.
[12] Premkumar, S., Ramu, G., Gunasekaran, S., & Baskar, D. (2014). Solar industrial process heating associated
with thermal energy storage for feed water heating. Middle East Journal of Scientific Research, 20(11),
1686-1688.
[13] Kumar, S.S., Karrunakaran, C.M., Rao, M.R.K., & Balasubramanian, M.P. (2011). Inhibitory effects of
Indigofera aspalathoides on 20-methylcholanthrene-induced chemical carcinogenesis in rats. Journal of
carcinogenesis, 10.
[14] Beula Devamalar, P.M., Thulasi Bai, V., & Srivatsa, S.K. (2009). Design and architecture of a real-time webcentric telehealth diabetes diagnosis expert system. International Journal of Medical Engineering and
Informatics, 1(3), 307-317.
[15] Ravichandran, A.T., Srinivas, J., Karthick, R., Manikandan, A., & Baykal, A. (2018). Facile combustion
synthesis, structural, morphological, optical and antibacterial studies of Bi1− xAlxFeO3 (0.0≤ x≤ 0.15)
nanoparticles. Ceramics International, 44(11), 13247-13252.
[16] Thovhogi, N., Park, E., Manikandan, E., Maaza, M., & Gurib-Fakim, A. (2016). Physical properties of CdO
nanoparticles synthesized by green chemistry via Hibiscus Sabdariffa flower extract. Journal of Alloys and
Compounds, 655, 314-320.
[17] Thooyamani, K.P., Khanaa, V., & Udayakumar, R. (2014). Wide area wireless networks (IETF, Middle- East)
Journal of Scientific Research, 20(12), 2042-2046.
[18] Sundar Raj, M., Saravanan, T., & Srinivasan, V. (2014). Design of silicon-carbide-based cascaded multilevel
inverter. Middle-East Journal of Scientific Research, 20(12), 1785-1791.
[19] Achudhan, M., Jayakumar, M.P. (2014). Mathematical modeling and control of an electrically heated catalyst.
International Journal of Applied Engineering Research, 9(23), 23013.
[20] Thooyamani, K.P., Khanaa, V., & Udayakumar, R. (2013). Application of pattern recognition for farsi license
plate recognition. Middle-East Journal of Scientific Research, 18(12), 1768-1774.
[21] Jebaraj, S., Iniyan, S. (2006). Renewable energy programs in India. International Journal of Global Energy
Issues, 26 (43528), 232-257.
[22] Sharmila, S., & Jeyanthi Rebecca, L. (2013). Md Saduzzaman., Biodegradation of domestic effluent using
different solvent extracts of Murraya koenigii. J Chem and Pharm Res, 5(2), 279-282.
[23] Asiri, S., Sertkol, M., Guner, S., Gungunes, H., Batoo, K.M., Saleh, T.A., Manikandan A., & Baykal, A.
(2018). Hydrothermal synthesis of CoyZnyMn1-2yFe2O4 nanoferrites: magneto-optical
investigation. Ceramics International, 44(5), 5751-5759.
[24] Rani, A.J., & Mythili, S.V. (2014). Study on total antioxidant status in relation to oxidative stress in type 2
diabetes mellitus. Journal of clinical and diagnostic research: JCDR, 8(3), 108-110.
[25] Karthik, B. (2014). Arulselvi, Noise removal using mixtures of projected Gaussian scale mixtures. Middle-East
Journal of Scientific Research, 20(12), 2335-2340.
[26] Karthik, B., Arulselvi, & Selvaraj, A. (2014). Test data compression architecture for low-power VLSI testing.
Middle East Journal of Scientific Research, 20(12), 2331-2334.
[27] Vijayaragavan, S.P., Karthik, B., & Kiran Kumar, T.V.U. (2014). Privacy-conscious screening framework for
frequently moving objects. Middle-East Journal of Scientific Research, 20(8), 1000-1005.
[28] Kaliyamurthie, K.P., Parameswari, D., & Udayakumar, R. (2013). QOS aware privacy-preserving location
monitoring in a wireless sensor network. Indian Journal of Science and Technology, 6(5), 4648-4652.
[29] Silambarasu, A., Manikandan, A., & Balakrishnan, K. (2017). Room-temperature superparamagnetism and
enhanced photocatalytic activity of magnetically reusable spinel ZnFe 2 O 4 nanocatalysts. Journal of
Superconductivity and Novel Magnetism, 30(9), 2631-2640.
[30] Jasmin, M., Vigneshwaran, T., & Beulah Hemalatha, S. (2015). Design of power-aware on-chip embedded
memory-based FSM encoding in FPGA. International Journal of Applied Engineering Research, 10(2),
4487-4496.
[31] Philomina, S. & Karthik, B. (2014). Wi-Fi energy meter implementation using embedded linux in ARM
9. Middle-East Journal of Scientific Research, 20, 2434-2438.
[32] Vijayaragavan, S.P., Karthik, B., & Kiran Kumar, T.V.U. (2014). A DFIG-based wind generation system with
unbalanced stator and grid condition. Middle-East Journal of Scientific Research, 20(8), 913-917.
[33] Rajakumari, S.B., & Nalini, C. (2014). An efficient data mining dataset preparation using aggregation in
relational database. Indian Journal of Science and Technology, 7, 44-46.
[34] Karthik, B., Kiran Kumar, T.V.U., Vijayaragavan, P., & Bharath Kumaran, E. (2013). Design of a digital PLL
using 0.35 μm CMOS technology. Middle-East Journal of Scientific Research, 18(12), 1803-1806.
[35] Sudhakara, P., Jagadeesh, D., Wang, Y., Prasad, C.V., Devi, A.K., Balakrishnan, G., Kim B.S., & Song, J.I.
(2013). Fabrication of Borassus fruit lignocellulose fiber/PP composites and comparison with jute, sisal and
coir fibers. Carbohydrate polymers, 98(1), 1002-1010.
[36] Kanniga, E. & Sundararajan, M. (2011). Modelling and characterization of DCO using pass transistors.
In Future Intelligent Information Systems, 86(1), 451-457. Springer, Berlin, Heidelberg.
[37] Sachithanandam, P., Meikandaan, T.P., & Srividya, T. Steel-framed multi-story residential building analysis
and design. International Journal of Applied Engineering Research, 9(22), 5527-5529.
[38] Kaliyamurthie, K.P., Udayakumar, R., Parameswari, D., & Mugunthan, S.N. (2013). Highly secured online
voting system over network. Indian Journal of Science and Technology, 6(S6), 4831-4836.
[39] Sathyaseelan, B., Manikandan, E., Lakshmanan, V., Baskaran, I., Sivakumar, K., Ladchumananandasivam, R.
Kennedy, J., & Maaza, M. (2016). Structural, optical and morphological properties of post-growth calcine
TiO2 nanopowder for opto-electronic device application: ex-situ studies. Journal of Alloys and
Compounds, 671, 486-492.
[40] Saravanan, T., Sundar Raj M., & Gopalakrishnan K. (2014). SMES technology, SMES and facts system,
applications, advantages, and technical limitations. Middle East Journal of Scientific Research, 20(11),
1353-1358.
[41] Sindhu, N. & Archana, M. (2015). An Investigation of a Double-Tail Comparator for Low-Power
Applications. International Scientific Journal on Science, Engineering & Technology, 18(2), 48-63.
[42] Nair, P.G., & Loveleen, K.V. (2015). A Transformer less Single-Stage Single Switch AC/DC Converter with
High Power Factor, Regulated Bus and Output Voltages. International Scientific Journal on Science
Engineering & Technology, 18(4), 85-99
[43] Ali, S.M., & Dr. Karule, P.T. (2015). Development of Automation System for Disease Disorder Diagnosis
using Artificial Neural Networks and Support Vector Machine. International Scientific Journal on Science
Engineering & Technology, 18(5), 103-112.
[44] Prichani, J.S., Sakwa, T.W., & Ongati, N.O., (2017). Smart Device based on GSM and GPS Technologies for
Muliebrity Shielding. The SIJ Transactions on Computer Science Engineering & its Applications, 5(1), 13-
15.
[45] Mallika, N.M., & Srinivasan, B. (2017). A Multi-Point Cluster for Maximization of Power Constraints in a
Downlink Coordinated System. The SIJ Transactions on Computer Science Engineering & its Applications,
5(1), 16-19.
[46] Kumaravel, S., Nisha, G., Malathi, S., Malathy, R., & Madhubalasree, K. (2017). Connected Cars – The Future
CarsDriven by Data. The SIJ Transactions on Computer Science Engineering & its Applications, 5(2), 1-3.
[47] Jayasarathi, M., Rajeshwari, S., Shiny Mercy, I., & Rathika, S.K.B. (2019). Enhanced on Data Encryption
Standard for Secured Cloud Storage. Bonfring International Journal of Software Engineering and Soft
Computing, 9(1), 7-10.
[48] Kavya, M.S., Dr.Geetha, B.G., & GokulRaaja, J.M. (2019). Android Application Development for Textile
Industry. Bonfring International Journal of Software Engineering and Soft Computing, 9(1), 11-14.
[49] Vijayalakshmi, K. Bharathi, P., Deepika, N., Dennis Mary, S., & Jayathurga, B.(2017).Geographic based
Hybrid Algorithm for Wireless Sensor Network. The SIJ Transactions on Computer Networks &
Communication Engineering (CNCE), 5(2), 1-4.
[50] Kumaravel, S., Mohamed Thufail, H., Manoj Kumar, R., Karunyamani, V., & Mukesh Kumar, M.K. (2017).
Energy Harvesting and Management from Ambient RF Radiation. The SIJ Transactions on Computer
Networks & Communication Engineering (CNCE), 5(2), 5-9.
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Author
This work is licensed under a Creative Commons Attribution 4.0 International License.
You are free to:
- Share — copy and redistribute the material in any medium or format for any purpose, even commercially.
- Adapt — remix, transform, and build upon the material for any purpose, even commercially.
- The licensor cannot revoke these freedoms as long as you follow the license terms.
Under the following terms:
- Attribution — You must give appropriate credit , provide a link to the license, and indicate if changes were made . You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
Notices:
You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation .
No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.
