Design and Fabrication of single band monopole antennafor WLAN applications

Authors

  • Yousif Jawad Kadhim Nukhailawi Technical Institute of Najaf, Al-Furat Al-Awsat Technical University, Iraq Author
  • Mohammed Abdulmahdi Mohammed ali College of Health and Medical Techniques\ Kufa, Al-Furat Al-Awsat Technical University, Al-Najaf, Iraq. Author
  • FAHAMA Hassoon Salman Technical Institute of Najaf, Al-Furat Al-Awsat Technical University, Iraq Author
  • Ayad Muslim Hamzah Faculty of Electrical and Electronic Engineering, University Tun Hussein Onn Malaysia, Parit Raja, Malaysia Author

DOI:

https://doi.org/10.61841/faqj8e46

Keywords:

WLAN applications, monopole antenna, wireless communication, CST Microwave Studio.

Abstract

 This paper introduces a 2.4GHz single-band antenna design. Suggested antenna dimensions are: (13mm x 23mm) for one band. The antenna characteristics, such as gain, long-range radiation patterns and the coupling coefficient, are expressed in the scattering parameter S11. Design and simulation are implemented using FIT-based CST Microwave Studio 

Downloads

Download data is not yet available.

References

[1] S. Ullah, S. Ahmad, B. A. Khan, U. Ali, F. A. Tahir, and S. Bashir, “Design and Analysis of a HexaBand Frequency Reconfigurable Monopole Antenna,” IETE J. Res., vol. 64, no. 1, pp. 59–66, 2018.

[2] “Progress In Electromagnetics Research C, Vol. 20, 17–29, 2011,” vol. 20, no. January, pp. 17–29, 2011.

[3] Y. L. Kuo and K. L. Wong, “Printed Double-T Monopole Antenna for 2.4/5.2 Ghz Dual-Band WLAN Operations,” IEEE Trans. Antennas Propag., vol. 51, no. 9, pp. 2187–2192, 2003.

[4] Z. W. Yan, G. Wang, G. L. Tian, W. M. Li, D. L. Su, and T. Rahman, “The HF channel em parameters estimation under a complex environment using the modified IRI and IGRF model,” IEEE Trans. Antennas Propag., vol. 59, no. 5, pp. 1778–1783, 2011.

[5] H. U. Iddi, M. R. Kamarudin, T. A. Rahman, and R. Dewan, “Design of dual-band B-shaped monopole antenna for MIMO application,” IEEE Antennas Propag. Soc. AP-S Int. Symp., pp. 2–3, 2012.

[6] S. Hayat, I. A. Shah, I. Khan, I. Alam, S. Ullah, and A. Basir, “Design of tetra-band frequency reconfigurable antenna for portable wireless applications,” 2016 Int. Conf. Intell. Syst. Eng. ICISE 2016, no. January, pp. 10–13, 2016.

[7] E. G. Turitsyna and S. Webb, “Simple design of FBG-based VSB filters for ultra-dense WDM transmission ELECTRONICS LETTERS 20th January 2005,” Electron. Lett., vol. 41, no. 2, pp. 40–41, 2005.

[8] S. N. Azizi, N. Hasan, and M. H. Ramli, “Design and analysis of Yagi-Uda antenna for WLAN applications,” J. Telecommun. Electron. Comput. Eng., vol. 9, no. 1–3, pp. 109–112, 2017.

[9] A. Rathore, R. Nilavalan, H. F. AbuTarboush, and T. Peter, “Compact dual-band (2.4/5.2GHz) monopole antenna for WLAN applications,” Final Progr. B. Abstr. - iWAT 2010 2010 Int. Work. Antenna Technol. Small Antennas, Innov. Struct. Mater., pp. 3–6, 2010.

[10] J. R. Aguilar, M. Beadle, P. T. Thompson, and M. W. Shelley, “The microwave and RF characteristics of FR4 substrates,” IEE Colloq., no. 206, pp. 0–5, 1998.

[11] A. A. Qureshi, M. U. Afzal, T. Taqueer, and M. A. Tarar, “Performance analysis of FR-4 substrate for high frequency microstrip antennas,” 2011 China-Japan Jt. Microw. Conf. Proceedings, CJMW2011, no. January, pp. 159–162, 2011.

[12] H. Zhang, D. Chen, C. Zhao, K. Wang, and Y. Yu, “A compact flexible printed monopole antenna with embedded periodic H-shaped slots for WLAN applications,” Prog. Electromagn. Res. Lett., vol. 89, no. 9, pp. 61–67, 2020.

[13] A. A. Qureshi, M. U. Afzal, T. Taqueer, and M. A. Tarar, “Performance analysis of FR-4 substrate for high frequency microstrip antennas,” 2011 China-Japan Jt. Microw. Conf. Proceedings, CJMW 2011, pp. 159–162, 2011.

Downloads

Published

26.11.2024

Issue

Vol. 24 No. 8 (2020): 24 (8) 2020

Section

Articles

License

Copyright (c) 2024 Author

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

You are free to:

  1. Share — copy and redistribute the material in any medium or format for any purpose, even commercially.
  2. Adapt — remix, transform, and build upon the material for any purpose, even commercially.
  3. The licensor cannot revoke these freedoms as long as you follow the license terms.

Under the following terms:

  1. Attribution — You must give appropriate credit , provide a link to the license, and indicate if changes were made . You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  2. No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

Notices:

You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation .

No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.

How to Cite

Design and Fabrication of single band monopole antennafor WLAN applications. (2024). International Journal of Psychosocial Rehabilitation, 24(8), 15654-15662. https://doi.org/10.61841/faqj8e46